HI, The belly bumper cover has to come off as a couple of subjugate headlamp assembly bolts are located astern it. Here are directions divert remember to rate encouragement using the rating page as a result that I may receive credit. Thanks
Might next be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can pull off a fast defect find if you unplug the meter and control the engine without it. if the engine condition is the thesame subsequently chances are the meter or the relationship to it is faulty. Its plus worth cleaning the MAF sensor wires, as they can get coated as soon as dirt beyond time which after that offsets the reading. Use some edit cleaner or brake cleaner to vaporizer onto the wires to surgically remove the dirt on no account adjoin the wires following everything as they are very fragile
This could be a large vacuum leak ,with the MAF similar it is isolated measuring the expose that is getting taking into consideration the MAF, as a result if the intake manifold is sucking in freshen the ventilate to fuel ratio will be enormously out and cause the engine to stall. If MAF is disconnected the engine goes into a limp measurement and lets the engine run. considering carb cleaner vaporizer vaporizer in the area of the hissing later the engine giving out and gone you listen the engine stall or rev sophisticated there is the leak ,could be a bad vacuum hose bad gasket upon the manifold.