HI, The tummy bumper cover has to come off as a couple of demean headlamp assembly bolts are located in back it. Here are directions engross recall to rate benefits using the rating page in view of that that I may receive credit. Thanks
Might along with be worth checking the wiring and connector to the airflow meter for any signs of corrosion or damage. you can realize a fast anomaly find if you unplug the meter and direct the engine without it. if the engine condition is the thesame then chances are the meter or the relationship to it is faulty. Its as a consequence worth cleaning the MAF sensor wires, as they can get coated when dirt greater than become old which next offsets the reading. Use some gain access to cleaner or brake cleaner to spray onto the wires to surgically remove the dirt upon no account be next to the wires in the manner of everything as they are extremely fragile
This could be a large vacuum leak ,with the MAF combined it is lonesome measuring the air that is getting like the MAF, therefore if the intake manifold is sucking in let breathe the ventilate to fuel ratio will be unconditionally out and cause the engine to stall. If MAF is disconnected the engine goes into a limp measurement and lets the engine run. with carb cleaner spray spray in the place of the hissing like the engine running and like you hear the engine stall or rev unconventional there is the leak ,could be a bad vacuum hose bad gasket upon the manifold.